LINKEX™ LED TEMPORARY LUMINAIRE

The LinkEx™ LED Temporary Luminaire is a high powered LED Leadlamp for use in short-term lighting installations and maintenance tasks and is CE marked to the ATEX directive and IECEx certified for safe use in Zones 1 and 2 potentially explosive gas and dust atmospheres, where a T4 temperature class permits.

Product Information

LX-400SH/T4/360/SY10/ATX110, LX-400SH/T4/360/SY10/ATX230, LX-400SHA110/T4/SY5, LX-400SHA230/T4/360/SY5, LX-400SHA230/T4/SY5, LX-400SH/T4/SY10/ATX110, LX-400SH/T4/SY10/ATX230, LX-400SLA24/T4/SY5, LX-400SL/T4/SY10/ATX24
ZONES: 1, 2, 21 AND 22

The range of LinkEx™ LED Temporary Luminaires provides high quality ambient lighting.  Each light utilises two arrays of high power LEDs which:

• Supply brilliant white light output
• Are highly reliable
• Are a low maintenance 'fitted for life' light source, and allow power savings which allow longer cable runs and more lights to be powered from a single supply

Luminaires are available in '180°' format (arrays side-by-side) to give effective unidirectional illumination or in '360°' format (arrays back-to-back), to special order, to give effective omni-directional 'all round' illumination.

The unit’s construction is lightweight, compact and highly robust, with impact resistant end caps and tube (with anti-static and light diffusing coatings) plus the high visibility shock absorbing bump rings are chemical resistant and minimise the risk of drop damage, all ideal for handling in demanding conditions. Units can be fitted with integral ATEX sockets allowing multiple lamps to be quickly and safely connected and positioned in a chain, even whilst energised in an Ex Atmosphere.

Available in two voltage input ranges: high voltage 85-264V AC for general applications and low voltage 18-50V AC/DC for use in confined space applications, such as metal tanks, with a higher risk of electric shock. The wide input voltage ranges maximise usability and safety for chains of multiple lights or for long cable runs, where supply voltage can drop. The unique SOVI™ (Safe Optimal Voltage Indicator) monitoring system clearly indicates when the supply voltage is operating outside the specified limits;  the light will pulse either dimmer (if voltage input is above the specified limit) or pulse brighter (if the input voltage is below the specified limit). 

Features & Benefits

• ATEX & IECEx certified for use in Zones 1 and 2 explosive gas and dust atmospheres
• Up to 4,000 lumens light output at source
• High light output at the widest part of the beam
• Features the unique SOVI (Safe Optimal Voltage Indicator)
  • The beam will pulse to indicate if the lamp is not at optimum performance voltage.  Safe to 0 volts supply
• T4 temperature class
• High power, low maintenance LED light source 'Fitted for Life'
• High and low input voltage versions available
• Light weight
• Available with ATEX plugs and sockets to link in series/chain
• Compact and robust design
• Low power consumption
• Certified, anti-static, protection film and bags available
• Wide range of fixing and mounting accessories available

Request a Quote

Technical Information

*Lamps fitted with Stahl sockets are IP54 and are not dust approved, so are marked II 2 G Ex eb mb op is IIC T3 Gb or II 2 G Ex eb mb op is IIC T4 Gb Ta = -20°C to +55°C

• All information has been gathered under laboratory conditions, the user must regard the values given as approximate.
• Changes may be made to the above specification without notification, details are available on request.

Accessories

Downloads