LBXE EMERGENCY BULKHEAD
The LBXE LED Emergeny Bulkhead is a compact, versatile and robust light which is ideal to safely illuminate key walkways, steps and entrances within Hazardous Areas. It will switch to emergency battery power should the mains supply fail.
There are 3 different emergency mode durations - the maximum being 4 hours
Product Information
The LBXE Emergency has all the features and benefits of the standard LBX Bulkhead range (see standard bulkhead models), with the additional advantage of the following emergency mode durations (selectable by the installer on-site) supplied by the NiMH battery.
• 4 hours at 25% lumen output (max)
• 2 hours at 50% lumen output (max)
• 1 hour at 100% lumen output (max)
The Intelligent Emergency circuit automatically performs periodic functional and battery duration self-testing to monitor the system and battery condition. Throughout this period LED output from the Emergency Bulkhead remains at full power to ensure activities and operations in the vicinity remain undisturbed.
The Emergency Bulkhead can be wired on-site as per the users’ requirements as either a “maintained” emergency light, which remains permanently illuminated whilst energised, or a “non-maintained” emergency light, which remains non-illuminated whilst energised. In the event of a mains power failure, both units will illuminate.
A 3 colour LED indicator will show the state of the circuit:
• Green indicates that everything is functioning correctly
• Amber indicates the unit is executing a self-test
• Red indicates a fault or that the battery hasn’t reached full capacity
(see manual for further details)
If the battery is removed for maintenance or replacement and the Emergency Bulkhead is reenergised, it will continue to illuminate normally at full output whilst powered from mains (maintained only).
-
All the features of the standard LBX Bulkhead Range
With the additional advantage of 3 selectable emergency mode durations
-
Directional Linear Optics (DLO)
Fitted as standard for unique directional, low glare human centric lighting
-
Ideal for indoor and outdoor use
An IP66/67 (depending on gland fitted) rating makes the LBXE Bulkhead ideal for both indoor and outdoor hazardous area use
LBXE-L-59
Gas Zone: 1 and 2
Dust Zone: 21 and 22
Power Source: Mains Voltage 110 or 230v with Emergency Battery
LBXN-L-59
Gas Zone: 1 and 2
Dust Zone: 21 and 22
Power Source: Mains Voltage 110 or 230V with Emergency Battery
| Product Reference | LBXE-L-59 | LBXN-L-59 | |
|---|---|---|---|
| Code |
II 2 G D Ex eb mb IIC T4 Gb Ex tb IIIC T80°C Db |
||
| Certificate | ExVeritas 19 ATEX 0439X / IECEx EXV 19.0002X / ExVeritas 21 UKEX 0945X | ||
| Input Voltage Range | 100-140V AC; 200-277V AC | ||
| Input Power | 32W | 6W | |
| Frequency | 50 - 60 Hz | ||
| Power Factor | >0.90 | ||
| Lumen Output (Max)* | 1,629 | ||
| LED Module & QTY | 1x DLO | ||
| Beam Angles | 90° (110° upon request) | ||
| Ingress Protection | IP66/IP67 (depending on gland fitted) | ||
| Gas Temp. Class | T4 | ||
| Weight | 5.5kg | ||
| Dust Surface Temp. | T80 °C | ||
| Lower Temp. Limit | -40°C | ||
| Upper Temp. Limit | 59 °C | ||
| Colour Temperature | 5000K | ||
- All information has been gathered under laboratory conditions, the user must regard the values given as approximate.
- Changes may be made to the above specification without notification, details are available on request.
- *Lumen output figures stated are for 230V AC
(The Emergency Bulkhead can be wired as a “maintained” or “non-maintained” version - the table shows “maintained” data on the left, “non-maintained” on the right)
Light Output Diagram
Product Dimensions
LBXE Bulkhead Instructions
(PDF, 1.35 MB)
LBXE Emergency Bulkhead ATEX Certificate
(PDF, 239 KB)
LBXE Emergency Bulkhead IECEx Certificate
(PDF, 424 KB)
LBXE Emergency Bulkhead UKEX Certificate
(PDF, 286 KB)
Got a question?
Want to learn more? Just contact us and we’ll be more than happy to help!